1
2

Hot search keywords: machining center handle, CNC machining center handle, engraving machine handle, HSK dynamic balance high-speed handle, ISO handle, woodworking handle, NBT woodworking handle, wrench, tool holder claw, pull nail, nut, mobile phone case handle

News Center

Hot News

Types and Uses of Woodworking Tool Holders for Machining Centers

The woodworking tool holder is a connecting component between machine tools, and it is a key factor affecting concentricity and dynamic balance. It should not be regarded as a general part. Concentricity can determine whether the cutting amount of each cutting edge component is uniform when the tool rotates around. When the spindle rotates, dynamic imbalance can cause periodic vibrations.

2022

08-12

How to choose a woodworking knife handle?

The woodworking tool handle connects the machine spindle and the tool during processing, serving as a bridge that links the two. The handle primarily reflects the performance of the spindle, with parameters such as torque and rotation speed being output through the handle. Initially, it is evident that the handle must clamp the tool tightly to achieve normal processing. Therefore, the role of the woodworking tool handle is very important.

2022

08-03

The selection of woodworking knife handles depends on the machine tools and working conditions.

Due to the variety of tool holders, the choice of tool holder primarily depends on the classification and positioning of the company's products. The type of processing determines what kind of machine tool to purchase, and the tool holder must comply with the interface of the machine tool and spindle. The selection of machine tools and spindles is crucial.

2022

07-22

What types of carving machine tool holders are there?

There are many types of engraving machine tool holders, and their types mainly depend on the method of connection between the tool holder and the machine tool. The choice of how the engraving machine tool holder connects to the machine spindle is primarily influenced by the method of tool change, which can be manual or automatic. Additionally, factors such as the clamping force taper, the source of clamping force, and the rotational speed also play a role.

2022

07-11

Router Bit Handle: Important Considerations During Processing

When installing the tool holder of the engraving machine onto the machine tool, it is important to pay attention to the following aspects. First, when installing the tool holder, make sure that there is no dust, scratches, or rust in the spindle hole of the machine and on the tool holder. Additionally, it is necessary to regularly check the degree of eccentricity accuracy. The pull pin is a consumable material, so it should be replaced regularly.

2022

07-04

The structure and form of the rear pull-type engraving machine tool holder.

The structure of CNC machine tool engraving machine tool holders is divided into two types: integral and modular. The integral CNC tool holder has the working part that installs the cutting tool and the handle used for positioning on the machine tool as a single unit. Such engraving machine tool holders have poor adaptability to changes in the machine tool and parts. In order to adapt to the changes between parts and machine tools, users must stock a variety of specifications of engraving machine tool holders, resulting in a very low utilization rate of this type of tool holder.

2022

06-28

Introduction to the Carving Machine Tool Holder

Types of engraving machine tool holders: It depends on the connection method between the tool holder and the machine tool. The choice of connection method between the engraving machine tool holder and the machine spindle mainly considers factors such as tool changing method (automatic or manual), clamping force (taper, source of clamping force), and rotational speed.

2022

06-21

The professional manufacturer of woodworking knife handles introduces the main functions of woodworking drill bits and mortise processing tools.

Woodworking drill bits are rod-shaped or spiral tools with cutting edges at the end (see Figure 4), used for processing through holes or blind holes. The difference between woodworking drill bits and woodworking end mills is that the sides of the drill bits do not have cutting edges. In addition to having a main cutting edge, woodworking drill bits also have sharp scoring edges on the outer edge, which are used to cut wood fibers, making the sides of the holes smoother.

2021

12-28

Warehouse KURATA high-speed tool holder lock seat specifications for matching with tool holders.

HSK25 diameter 25 HSK32 diameter 32 HSK40 diameter 40 HSK50 diameter 50 HSK63 diameter 63 HSK80 diameter 80 HSK100 diameter 100

2021

12-28

Detailed Explanation of HSK CNC Tool Holders

The technology of HSK CNC tool holders is the foundation of mechanical processing automation and is the core technology of CNC machine tools. The level of this technology is related to the strategic position of a country and reflects the level of its comprehensive strength. It has developed alongside advancements in information technology, microelectronics technology, automation technology, and testing technology.

2021

12-28

< 123 > proceed page

Contact Information

Contact: Ma Yantao

Mobile:+8613969202938
Telephone:0086-0534-7860508

Telephone:0086-0534-4611778
E-mail：mayantao369@126.com

E-mail： info@best-tools.cn

Address: East First, Sanyi Street, Taiwan Industrial Park, Pingyuan County, Dezhou City, Shandong Province

WeChat

WeChat QR Code

Shop Link

Alibaba Store 1

Alibaba Store 2

Taobao Store

Copyright of the page -- Baxter Machine Tools Co., Ltd.

Website construction: Chinese enterprises cross-border

Business License